PURSUE PERFRCTION CREATE EXCELLENCE PRIDE PENETRATS CHANGHONG
In automatic control system, the typical control mode of “central monitoring, decentralized control” is adopted. The control system of the production equipment in the paint shop is divided into three layers, that is monitoring layer, control layer and equipment layer. Each layer uses different internet structure, soft and hard ware configuration, so as to realize the functions.
Through more than twenty years’ improvement, the oven is characterized by the following features:
1.Adopt the modular design, which is easy for manufacturing and installation, thus to shorten the working period.
2.The efficient thermal transference makes the area temperature higher than the vehicle body’s temperature, thus to make the best use of the space and decrease the running cost.
3.The maintenance is decreased due to simple and reliable design.
4.No prominence and dust-collection parts, which is easy for cleaning.
5.Increase the circulating air volume, thus to make the temperature around the vehicle uniform (such as A and B volume) to ensure the sufficient baking of each part of the vehicle.
Modular-section Crane Transportation
Modular-section Leakage Test
Single tunnel chamber, the outside air shall be sucked into the cooling chamber via air duct, filter. Outside the vehicle body, the nozzle made of aluminum is provided, the velocity is about 20m/s, the distance from the opening to the vehicle’s surface shall less than 300mm.
The self-supporting structure of the oven body is made of galvanized plate, also the inner part. A separate platform in steel structure is used for supporting the air exchanging device.
The cleanness degree of the cooling wind flow into the cooling chamber shall ≥5μm that of 99% of the dust removing.